|
|
|
|
Let's see how this tapered longchuck stuff goes.
The 15lb mainline is 0.33 dia, and very low stretch so if long chucking straight through you would need to use the 20lb in 0.40.
The tapered 15 at 0.33 for the mainline part and the shockie section is 30lb 0.47 dia.
I gave it an hours soak in some warm water with some washing up liquid.
When spooling the spool needs to be upright, and the line needs to come towards you off the bottom of the spool.
My reel spool said 300m of 15lb, and the spool of tapered 15 filled it to the brim perfectly.
|
|
|
|
In reply to Post #1
tapered long chunk line is real good this being the 30lb > 12lb
|
|
|
|
Turning to its casting properties as a distance mono other than those just mentioned in the previous post how do you rate it as the best Distance Mono?
Fox have brought out the Exocet Pro yes its not clear but as a distance line how do they compare ??
|
|
|
|
In reply to Post #1
i use the longchuck in 0.4.
From a pure distance perspective (no leader) have tested it (measured) vs Carp Line and Syncro in same diameter.
Obviously most peoples casting differs but the longchuck gave the longest casts, Syncro 2nd, Carp Line 3rd. But there was less than 10 yards between shortest and longest.
Doesnt sink as well as syncro tho imo
|
|
|
|
Used the longchuck in the 12lb version with a leader it's a very good line behaves itself and is very strong.
The Gardner line I've used both version and the clear is so much better than the brown which is horrible springy stuff although very durable.
|
|
|
|
In reply to Post #13
I've used the longchuck tapered mainline in 15lb and it was a dream to use. Had it well over a year so it lasts well too. Use with confidence.
|
|
|
|
|
There is a video of Tosh off here putting it 200 yards. 13ft amplify rods also
|
|
|
|
In reply to Post #11
Doesn't that go against what Korda are saying though?
My reading of it is that they're saying that due to not having a colour added it makes the line better to cast...
I.e. more supple?
|
|
|
|
In reply to Post #1
Its the same as clear plastic buckets are brittle compared to ones that have die int it.
I know tel20 rates the longchuck - ok, he's with Korda now, but if it was ***** it would have shown up in his tutorials by now.
|
|
|
|
In reply to Post #3
I've not compared Gardner Pro light and dark against each other, although I use them both.
I've just been reading a Terry Edmonds article and he obviously recommends thinner lines for distance casting, the more supple the better:
Line
After sorting out the technique, line will play a massive part in how far you cast. What you are looking for is the supplest line available, with controlled stretch, and strong enough to land the fish safely.
Supple line creates smaller coils, and passes through the guides with less friction; thinner diameters also help with this, and create less air resistance in the cast, so will cast further. Sinking lines are not needed at distance; they are heavier so don't cast as well, and nearly always at range we are fishing very tight lines, so a heavy lead is not a top requirement.
However, I do feel that Korda may have used a bit of poetic licence...
Low stretch may well see a need for shock leaders in the 15lb Breaking strain
Brand new Long Chuck mainline from Korda has been specifically designed for long range fishing. This line has a high breaking strain to diameter ratio which significantly reduces drag in the air, enabling you to cast further.
The line also boasts a low amount of stretch, which means you can compress the rod quicker during the cast. The Long Chuck main line also has a low water absorption rate which helps to ensure the line is as light in the air as possible, meaning it will create less drag and will cast further. The low water absorption rate combined with the low stretch also helps when feeling the lead down at long range or in a cross wind.
If you're planning on fishing out in the deep water on your next session, respool with Korda Long Chunk and see the improvements in your casting.
|
|
|
|
In reply to Post #7
There are these new Tapered Lines out now, I believe Korda are bringing out the Longchuck stuff as a Tapered line soon too.
|
|
|
|
In reply to Post #1
To me clear lines don't seem as supple, be that Daiwa Sensor brown or clear, or Amnesia black vs clear. The dyes seem to soften the line.
I never got on with the clear Daiwa Sensor, it didn't knot as nicely and was not as soft or supple as brown.
The stiffness meant I was not casting as far. For a maximum effort cast with a leader I was hitting around 4 or 5 metres shorter with the clear 120m compared to 125m for the brown. (3oz lead, 30lb Black Amnesia leader, 2.75lb TC Century SP's and Shimano Aerlex 8000's)
I looked at the diameter of the Korda Longchuck line rated at 15lb, and it has a given diameter of 0.33mm, which is 0.02mm thinner than the Tournament rating of 0.35mm for 'properly' rated 15lb lines. In other words, it is thinner, so should cast further.
The big thought is do you need a leader on it if you are giving it the big one?
|
|
|
|
|
0.28 line is always going to cast well if you are allowed to use a shock leader. I doubt it makes much difference which 0.28 line you choose. Unfortunately I'm not allowed to use a leader so it's 0 37 straight through for me.
|
|
|
|
In reply to Post #4
I share the same thoughts with the sensor line , definitely different behaving lines between clear and brown , thinking back I preferred the clear as it ‘seemed' to cast a little better
|
|
|
|
In reply to Post #1
Hi. I've used the longchuck tapered Korda line and it performed very well, Caught hard fighting French carp to mid 50's and never had a failure, use with confidence IMO.
|
|
Tackle